Analysis of Fillet Welds
The following information should be used for sizing calculations ONLY! Any formal calculations MUST use values/standards from relevant company
Stress in Beams
Stress (N/mm^2 or MPa) can be defined as the internal resistance of a structure or body when an
Fastener Groups; In-Plane Loading
In-plane loading on a bolt occurs when forces are applied parallel to the plane in which the bolts lie. This
Pin Bending in Lugs
The following information should be used for sizing calculations ONLY! Any formal calculations MUST use values/standards from relevant company
Stress in Circular Plates
The following information should be used for sizing calculations ONLY! For calculating stresses in plates, we would fully recommend a
Cylindrical Stress
Cylindrical stress can be attributed in three ways:
* Hoop Stress - an tangential stress around the circumference of the cylinder
Fastener Groups; Out-of-Plane Loading
An out-of-plane load applied to a bracket will cause a simultaneous tensile and shear load to be applied to the
Sizing Fasteners
The following information should be used for sizing calculations ONLY!
Any formal calculations MUST use values from relevant company or