Aug
06
The Fundamentals of Surface Finish
3 min read
Design Guides
Jul
02
What are J Threads?
2 min read
Jun
18
Minimum Wall Thickness; CNC Machining
2 min read
Jun
04
Thread Rolling vs Thread Cutting
3 min read
May
14
Analysis of Fillet Welds
The following information should be used for sizing calculations ONLY! Any formal calculations MUST use values/standards from relevant company
4 min read
May
07
Stress in Beams
Stress (N/mm^2 or MPa) can be defined as the internal resistance of a structure or body when an
4 min read
Apr
23
Fastener Groups; In-Plane Loading
In-plane loading on a bolt occurs when forces are applied parallel to the plane in which the bolts lie. This
2 min read
Apr
09
Pin Bending in Lugs
The following information should be used for sizing calculations ONLY! Any formal calculations MUST use values/standards from relevant company
2 min read
Mar
05
Fastener Groups; Out-of-Plane Loading
An out-of-plane load applied to a bracket will cause a simultaneous tensile and shear load to be applied to the
3 min read
Feb
27
Sizing Fasteners
The following information should be used for sizing calculations ONLY!
Any formal calculations MUST use values from relevant company or
3 min read