Jun
04
Thread Rolling vs Thread Cutting
3 min read
Latest
May
28
Undercuts and Thread Relief
2 min read
May
14
Analysis of Fillet Welds
The following information should be used for sizing calculations ONLY! Any formal calculations MUST use values/standards from relevant company
4 min read
May
07
Stress in Beams
Stress (N/mm^2 or MPa) can be defined as the internal resistance of a structure or body when an
4 min read
Apr
23
Fastener Groups; In-Plane Loading
In-plane loading on a bolt occurs when forces are applied parallel to the plane in which the bolts lie. This
2 min read
Apr
16
Fastener Groups; Flanged Bolt Couplings
A flanged bolt coupling is a mechanical device used to connect two shafts together at their ends for the purpose
2 min read
Apr
09
Pin Bending in Lugs
The following information should be used for sizing calculations ONLY! Any formal calculations MUST use values/standards from relevant company
2 min read
Mar
26
Lugs
The following information should be used for sizing calculations ONLY! Any formal calculations MUST use values/standards from relevant company
2 min read
Mar
21
Stress in Rectangular Plates
The following information should be used for sizing calculations ONLY! For calculating stresses in plates, we would fully recommend a
3 min read
Mar
19
Stress in Circular Plates
The following information should be used for sizing calculations ONLY! For calculating stresses in plates, we would fully recommend a
3 min read